Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302


Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • induction melting furnace spec

    rolling wheeled sand mixer

    Electric furnace building mach

    Z145W microseismic compaction

    3T induction iron melting fur

    2T medium frequency iron melt

    1 ton medium frequency inducti

    1.5T medium frequency ind

    0.25T medium frequency inducti

    0.5T melting furnace

    0.5T aluminum shell hydraulic

    50T medium frequency induction

    30 tons medium frequency

    10T medium frequency indu

    5T 2 simultaneous melting fur

    3T steel shell hydraulic melti

    2T medium frequency iron melt

    1 ton steel shell hydraulic me

    1 ton plug rod medium frequenc

    1.5T steel shell hydrauli

    0.25T steel shell hydraulic me

    0.5T intermediate frequency me

    Copper wire copper tube bright

    Automatic round steel medium f

    Aluminum tube induction heatin

    Aluminum induction heating pro

    Steel pipe heat treatment prod

    Bar heat treatment Induction h

    3T induction iron melting furnace

    product description


    First, the melting furnace type:

    The melting furnace is a power-saving product, advanced technology, precise and reliable control, mature manufacturing process, safe and stable operation, perfect protection system, reasonable layout, convenient management and maintenance. It has the characteristics of fast melting speed , low energy consumption and stable and reliable operation.

    Second, the melting furnace composition range:

    Medium frequency power supply ★ capacitor cabinet ★ furnace body (steel shell or aluminum shell furnace body) ★ tilting furnace system ★ remote control box ★ closed loop cooling tower

    The melting furnace has protection systems such as over-voltage, over-current, water temperature, water pressure, short circuit, grounding, etc. The operation panel has various parameters of the working parameter display screen and the display working state, and there are indications such as fault and temperature.

    Third, 3T melting furnace technical parameters

    power supply

    Working form: single power supply 6 pulses or dual power supply 12 pulses

    Rectified form: 3- phase 6- pulse or 6- phase 12- pulse

    Output power: 1500 KW or 2000 KW , different power prices.

    Power efficiency −98%

    Start mode: sweep soft start

    Startup rate: 100% (including heavy load)

    Rated frequency: 300KHZ-500KHZ

    AC voltage: 400 V , 575v, 660v, 1000v

    DC voltage: 500V, 776V, 900V, 1350v

    IF voltage: 1500V, 2400V, 2700V

    DC current: 2000 A

    Input frequency: 50Hz

    Circulating water volume: integrated layered water cooling tower ZXZ-160T (10/120)

    Furnace body

    Rated capacity: 2 000KG

    Maximum capacity: 2 300KG

    Power factor: − 0.9 2

    Melting time : about 60 minutes / furnace

    Working temperature: 155 0<C -170 0<C

    Loading diameter: 760 mm (upper mouth) inner diameter of the ring: 960mm copper ring is 30x50x6mm

    Steel: turndown maximum angle: 95 < Aluminum Shell: turn down maximum angle: 180 <

    Outlet mode: side outlet or rear outlet

    Circulating water volume: integrated layered water cooling tower ZXZ-160T (10/120)

    Tilting method: aluminum shell 631 reducer, steel shell-hydraulic

    Unit power consumption: + 550 degrees / T \ 5% 1550 < C


    Rated capacity: 2000 KVA

    Primary voltage: 10KV

    Secondary voltage: 400 V , 575v, 660v, 1000v

    One phase: 3 phase

    Secondary phase number: /3 phase 6 pulse , 6 phase 12 pulse

    Output form: three @ three Y

    Cooling water


    One-piece layered water cooling tower ZXZ-160T (10/120)

    Cooling capacity :8 00000 kcal/h Cooling water volume :160 m3/h Fan power : 1.5KW 〜 6 units  

    Fan air volume22000m3/h 〜6     

    Spray pump  88 m3/h; 4.4kw

    Dimensions mm 4600〜2100〜4200 (one size machine)

    Fourth , the melting furnace configuration table

    Serial number





    IF power cabinet

    1 set



    Furnace body

    1 set

    Steel shell, yoke,


    Hydraulic system or reducer

    1 set

    Hydraulic power station


    External console

    1 set

    External control power adjustment for tilting furnace


    Water cooled cable

    1 set

    2 roots




    − 3 mm steel plate


    Rectifier transformer

    1 set



    PLC automatic control display system

    1 set



    Closed loop cooling tower

    1 set



    Rectifier thyristor

    2 set



    Inverter thyristor

    2 set


    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    Adress: Luoxin Industrial Park, Luoyang, Henan